Home
K&E Plastics, Inc.
141 Morse Road
Bennington VT 05201
Phone:(802) 375-0011
Fax:(802) 375-0022
E-mail Inquires:
service@keplastics.com

Haas® Machining Centers – Still Made in the USA

Machining Both Large and Small Plastic Parts with Accuracy

Haas® machines are made in Oxnard, California. The company prides itself on continuously refining and re-engineering its machines to meet changing customer demands. They are open to feedback from their customers and use that information in their quest for the ultimate, elusive goal – perfection. Haas vertical plastics machining centers are ruggedly built, dependable and user-friendly. They offer the precision necessary to produce quality part after quality part.

VF2SS LC SMTC

Super VF-2™

The Haas Super VF-2™ is a solid vertical machining center built entirely from American-made cast iron components. It features 30" x 16" x 20" (762 x 406 x 508 mm) xyz travel.

The Haas Super VF-2™ is a reliable and accurate small-footprint VMC with a direct drive spindle driven to 12000 RPM by a 20 hp vector Dual-Drive (Y-Delta) motor. The high-speed tool changer has a 20-tool capacity. Like every Haas machine, the VF-2 represents years of ongoing refinement. It is a valuable component on the K&E shoproom floor.

VF3SS RC SMTC

VF-3™

The VF-3 VMC is similar to the VF-2, with a larger table. The VF-3 has a 40 x 20 table capacity with 25-inch travel in the z-axis.

It features a 20-tool high-speed electronic tool changer and direct-drive 12.000-RPM spindle. It is a solid, fast machine that can turn out top quality part after part, meeting stringent tolerance demands.

SuperMiniMill SC

Super Mini-Mills™

K&E has 2 Haas Super Mini-Mills for machining tight-tolerance smaller parts. The work envelope is 16 x 12 x 10 (xyz). Like its bigger brothers the Super Mini-Mills feature direct drive spindles and high-speed tool changers. They too are rugged and dependable performers.

Haas® GR-408™ Gantry Router

The GR-408 handles 50 x 100 x 11 (xyz) materials, has a 15-hp 15,000 RPM 40-taper spindle, 10 pocket automatic and a 1-inch thick aluminum table. With the addition of this machine, K&E doubles its capacity for large-scale part production

Haas® HA5CU™ Series Rotary Indexer

The HA5C is a high-productivity, servo indexer that brings true 4th axis control to 3-axis machines. It is built with the same attention to dependability and accuracy, as are all Haas products. K&E has also added a servo-control unit, which allows the HA5C to be used on non-Haas machines.